Structure and electrical properties of boron-added (Ba,Sr)TiO3 thin films fabricated by the sol-gel method
SCIE
SCOPUS
- Title
- Structure and electrical properties of boron-added (Ba,Sr)TiO3 thin films fabricated by the sol-gel method
- Authors
- Jang, SI; Jang, HM
- Date Issued
- 1998-09-30
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- Thin films of BaxSr1-xTiO3 (BST, with x = 0.5) were fabricated on a RuO2/Ru/SiO2/Si substrate by the spin coating of the multicomponent sol prepared using metal alkoxides. Boron alkoxide was intentionally introduced to establish a better microstructure and to reduce the leakage current. AFM indicated that a crack-free uniform microstructure having a smooth surface was gradually developed with increasing boron content. The relative dielectric permittivity of the 250-nm thick BST thin films fired at 700 degrees C decreased with increasing content of boron, from 420 for the undoped film to 190 for the 10 mol% boron-added film at 1 MHz. This observation was interpreted in terms of a serial capacitance composed of the perovskite BST grain and the interfacial B2O3 glassy phase having a low dielectric permittivity. The leakage current density (J) also decreased with the amount of boron added. The leakage current for the applied voltage greater than 1 V showed a linear variation of log J with E-1/2 at room temperature, suggesting that the interface-controlled Schottky emission was the dominant conduction process for the BST thin films fabricated on the RuO2 electrode. (C) 1998 Elsevier Science S.A. All rights reserved.
- Keywords
- BST thin film; sol-gel; boron; sintering additive; Schottky emission; CHARGE; DRAMS
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/20622
- DOI
- 10.1016/S0040-6090(98)00560-4
- ISSN
- 0040-6090
- Article Type
- Article
- Citation
- THIN SOLID FILMS, vol. 330, no. 2, page. 89 - 95, 1998-09-30
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.