Fabrication of Mg/Al12Mg17 in-situ surface nanocomposite via friction stir processing
SCIE
SCOPUS
- Title
- Fabrication of Mg/Al12Mg17 in-situ surface nanocomposite via friction stir processing
- Authors
- Azizieh, Mahdi; Mazaheri, Mojtaba; Balak, Zohre; Kafashan, Hosein; Kim, Hyoung Seop
- Date Issued
- 2018-01
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- In this study, in-situ magnesium matrix surface nanocomposites were prepared by adding Al particles to an as cast pure Mg ingot using friction stir processing (FSP). The effects of the number of FSP passes, tool design, rotational and travel speeds were investigated. Microstructural investigations showed a significant grain refinement owing to dynamic recrystallization. According to scanning electron microscopy examinations and X-ray diffraction results, Al12Mg17 intermetallics were formed during FSP due to chemical reaction at the Al-Mg interface. As a result of severe plastic deformation, the intermetallic particles formed at nanometre size. X-ray diffraction showed that the crystalline size of intermetallic particles reached <= 50 nm, due to high material flow during FSP. The intermetallic formation and grain refining led to an increase in the hardness values 1.5-3 times) that of the as-cast pure Mg ingot.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/96087
- DOI
- 10.1016/j.msea.2017.12.030
- ISSN
- 0921-5093
- Article Type
- Article
- Citation
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 712, page. 655 - 662, 2018-01
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.