Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
SCIE
SCOPUS
- Title
- Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
- Authors
- Kim, JK; De Cooman, BC
- Date Issued
- 2016-10-31
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- The deformation mechanisms and mechanical properties of Fe-Mn-C-Al twinning-induced plasticity (TWIP) steels with a chemical composition range of 12-18 wt% Mn and 0-3 wt% Al, are reviewed. The in-depth microstructural analysis revealed that all the investigated TWIP steels exhibit deformation twinning as the main deformation mechanism in addition to dislocation glide. The Al-free TWIP steels have a much more complex deformation behavior than the Al-added TWIP steels. The deformation of Fe-15Mn-0.6C steel is accompanied by the formation of a very small amount of strain-induced epsilon martensite, in addition to deformation twinning. Deformation of Fe-12Mn-0.6C steel is accompanied by several deformation mechanisms which are simultaneously activated: strain-induced e martensite, formation of shear bands and strain-induced alpha' martensite, in addition to deformation twinning. The upper limit for the value of SFE for strain-induced martensitic transformation is determined to be approximately 13 my m(2). The results confirm that the SFE is the key parameters affecting the strength and the ductility of TWIP steel. A linear relation between the ultimate tensile strength (UTS) and the SFE is proposed, with the UTS increasing with decreasing SFE. (C) 2016 Elsevier B.V. All rights reserved.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/37514
- DOI
- 10.1016/j.msea.2016.08.106
- ISSN
- 0921-5093
- Article Type
- Article
- Citation
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 676, page. 216 - 231, 2016-10-31
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.