Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)
SCIE
SCOPUS
- Title
- Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)
- Authors
- Park, Jaeyeong; Song, Hyejin; Jung-Su Kim; Sohn, Seok Su; Lee, S
- Date Issued
- 2017-01
- Publisher
- Springer US
- Abstract
- When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of gamma (Mg17Al12) and beta (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration. (C) The Minerals, Metals & Materials Society and ASM International 2016
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/37424
- DOI
- 10.1007/S11661-016-3842-7
- ISSN
- 1073-5623
- Article Type
- Article
- Citation
- Metallurgical and Materials Transactions A, vol. 48A, no. 1, page. 57 - 62, 2017-01
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.