Prediction of microstructure during high temperature forming of Ti-6Al4V alloy
SCIE
SCOPUS
- Title
- Prediction of microstructure during high temperature forming of Ti-6Al4V alloy
- Authors
- Lee, YH; Shin, TJ; Yeom, JT; Park, NK; Hong, SS; Shim, IO; Hwang, SM; Lee, CS
- Date Issued
- 2004-01
- Publisher
- TRANS TECH PUBLICATIONS LTD
- Abstract
- Prediction of final microstructures after high temperature forming of Ti-6Al-4V alloy was attempted in this study. Using two typical micro structures, i.e., equiaxed and Widmanstatten microstructures, compression test was carried out up to the strain level of 0.6 at various temperatures (700 similar to 1100degreesC) and strain rates (10(-4) similar to 10(2)/s). From the flow stress-strain data, parameters such as strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equations for both microstructures. Then., finite element analysis was performed to predict the final microstructure of the deformed body, which was well accorded with the experimental results.
- Keywords
- Ti-6Al-4V alloy; microstructure; flow softening; globularization; finite element analysis; SUPERPLASTIC DEFORMATION; ACCOMMODATION MODE
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/37391
- DOI
- 10.4028/www.scientific.net/MSF.449-452.189
- ISSN
- 0255-5476
- Article Type
- Article
- Citation
- MATERIALS SCIENCE FORUM, vol. 449-4, page. 189 - 192, 2004-01
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.