Open Access System for Information Sharing

Login Library

 

Article
Cited 24 time in webofscience Cited 30 time in scopus
Metadata Downloads

Investigation of thermal degradation with extrusion-based dispensing modules for 3D bioprinting technology SCIE SCOPUS

Title
Investigation of thermal degradation with extrusion-based dispensing modules for 3D bioprinting technology
Authors
Lee, HYoo, JJKang, HWCho, DW
Date Issued
2016-03
Publisher
IOP PUBLISHING LTD
Abstract
Recently, numerous three-dimensional (3D) bioprinting systems have been introduced for the artificial regeneration of tissues. Among them, the extrusion-based dispensing module is the most widely used because of the processability it gives various biomaterials. The module uses high forces and temperature to dispense materials through a micro-nozzle. Generally, the harsh conditions induce thermal degradation of the material in the dispensing procedure. The thermal degradation affects the properties of the materials, and the change of the properties should be carefully controlled, because it severely affects the regeneration of tissues. Therefore, in this research, the relationship between the dispensing module and the thermal degradation of material was investigated. Extrusion-based dispensing modules can be divided into the syringe type (ST) and filament type (FT) based on working principles. We prepared a poly lactic-co-glycolic acid (PLGA) scaffold with the two methods at various time points. Then, the characteristics of the printed scaffolds were assessed by measuring molecular weight (M-w), glass transition temperature (T-g), in vitro degradation, compressive modulus, and cytocompatibility. The results showed that the PLGA scaffold with the FT dispensing module maintained its properties regardless of printing time points. In contrast, severe thermal degradation was observed in the scaffold group prepared by the ST dispensing module. Consequentially, it was obvious that the FT dispensing module was more suitable for producing scaffolds without severe thermal degradation.
URI
https://oasis.postech.ac.kr/handle/2014.oak/36096
DOI
10.1088/1758-5090/8/1/015011
ISSN
1758-5082
Article Type
Article
Citation
BIOFABRICATION, vol. 8, no. 1, page. 15011, 2016-03
Files in This Item:
There are no files associated with this item.

qr_code

  • mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher

조동우CHO, DONG WOO
Dept of Mechanical Enginrg
Read more

Views & Downloads

Browse