Microstructure and tensile properties of hot-rolled Fe-C-Mn-Si-Cu multiphase steel
SCIE
SCOPUS
- Title
- Microstructure and tensile properties of hot-rolled Fe-C-Mn-Si-Cu multiphase steel
- Authors
- Lee, H; Koh, HJ; Seo, CH; Kim, NJ
- Date Issued
- 2008-07
- Publisher
- PERGAMON-ELSEVIER SCIENCE LTD
- Abstract
- Cu-containing Fe-C-Si-Mn multiphase steel was fabricated by hot rolling. The microstructure of the steel becomes more homogeneous and the type of hard second-phase changes to martensite from bainite with increasing quench-finish and coiling temperatures. The precipitation of Cu-related phases is promoted by an increase in quench-finish temperature. The steel with fine distributions of particles consisting of martensite and retained austenite within the F-Cu-containing ferrite matrix shows the best combination of strength and ductility. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
- Keywords
- TRIP-aided steel; hot working; rolling; tension test; ductility; TRIP-AIDED STEELS; STRAIN-INDUCED TRANSFORMATION; RETAINED AUSTENITE STABILITY; ANNEALED MARTENSITE MATRIX; MECHANICAL-PROPERTIES; BEHAVIOR; COPPER; DUCTILITY; ALLOY; PHOSPHORUS
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/29373
- DOI
- 10.1016/j.scriptamat.2008.02.030
- ISSN
- 1359-6462
- Article Type
- Article
- Citation
- SCRIPTA MATERIALIA, vol. 59, no. 1, page. 83 - 86, 2008-07
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.