Plasma-Enhanced ALD of TiO2 Thin Films on SUS 304 Stainless Steel for Photocatalytic Application
SCIE
SCOPUS
- Title
- Plasma-Enhanced ALD of TiO2 Thin Films on SUS 304 Stainless Steel for Photocatalytic Application
- Authors
- Lee, CS; Kim, J; Son, JY; Maeng, WJ; Jo, DH; Choi, W; Kim, H
- Date Issued
- 2009-01
- Publisher
- ELECTROCHEMICAL SOC INC
- Abstract
- Plasma-enhanced atomic layer deposition (PE-ALD) of TiO2 thin films using Ti(NMe2)(4) [tetrakis(dimethylamido) Ti] and O-2 plasma were prepared on stainless steel to show the self-cleaning effect. The TiO2 thin films deposited on stainless steel have high growth rate, large surface roughness, and low impurities. The film deposited below 200 degrees C was amorphous, while the films deposited at 300 and 400 degrees C showed anatase and rutile phases, respectively. The contact angle measurements on crystalline PE-ALD TiO2 thin films exhibited superhydrophilicity after UV irradiation. The TiO2 thin film with anatase phase deposited at 300 degrees C showed the highest photocatalytic efficiency, which is higher than on Activ glass or thermal ALD TiO2 films. We suggest that anatase structure and large surface area of TiO2 thin film on stainless steel are the main factors for the high photocatalytic efficiency. (C) 2009 The Electrochemical Society. [DOI: 10.1149/1.3095515] All rights reserved.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/27751
- DOI
- 10.1149/1.3095515
- ISSN
- 0013-4651
- Article Type
- Article
- Citation
- JOURNAL OF THE ELECTROCHEMICAL SOCIETY, vol. 156, no. 5, page. D188 - D192, 2009-01
- Files in This Item:
-
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.