Preparation of Multilayered CdSe Quantum Dot Sensitizers by Electrostatic Layer-by-Layer Assembly and a Series of Post-treatments toward Efficient Quantum Dot-Sensitized Mesoporous TiO2 Solar Cells
SCIE
SCOPUS
- Title
- Preparation of Multilayered CdSe Quantum Dot Sensitizers by Electrostatic Layer-by-Layer Assembly and a Series of Post-treatments toward Efficient Quantum Dot-Sensitized Mesoporous TiO2 Solar Cells
- Authors
- Ho Jin; Sukyung Choi; Ranganathan Velu; Kim, S; Hyo Joong Lee
- Date Issued
- 2012-03-27
- Publisher
- AMER CHEMICAL SOC
- Abstract
- A multilayer of CdSe quantum dots (QDs) was prepared on the mesoporous surface of a nanoparticulate TiO2 film by a layer-by-layer (LBL) assembly using the electrostatic interaction of the oppositely charged QD surface for application as a sensitizer in QD-sensitized TiO2 solar cells. To maximize the absorption of incident light and the generation of excitons by CdSe QDs within a fixed thickness of TiO2 film, the experimental conditions of QD deposition were optimized by controlling the concentration of salt added into the QD-dissolved solutions and repeating the LBL deposition a few times. A proper concentration of salt was found to be critical in providing a deep penetration of QDs into the mesopore, thus leading to a dense and uniform distribution throughout the whole TiO2 matrix while anchoring the oppositely charged QDs alternately in a controllable way. A series of post-treatments with (1) CdCl2, (2) thermal annealing, and (3) ZnS-coating was found to be very critical in improving the overall photovoltaic properties, presumably through a better connection between QDs, effective passivation of QD's surface, and a high impedance of recombination, which were proved by transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS) experiments. With a proper post-treatment of multilayered QDs as a sensitizer, the overall power conversion efficiency in the CdSe QD-sensitized TiO2 solar cells could reach 1.9% under standard illumination condition of simulated AM 1.5G (100 mW/cm(2)).
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/27453
- DOI
- 10.1021/LA202892H
- ISSN
- 0743-7463
- Article Type
- Article
- Citation
- LANGMUIR, vol. 28, no. 12, page. 5417 - 5426, 2012-03-27
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.