Effects of Cooling Conditions on Tensile and Charpy Impact Properties of API X80 Linepipe Steels
SCIE
SCOPUS
- Title
- Effects of Cooling Conditions on Tensile and Charpy Impact Properties of API X80 Linepipe Steels
- Authors
- Seung Youb Han; Sang Yong Shin; Lee, S; Kim, NJ; Jin-ho Bae; Kisoo Kim
- Date Issued
- 2010-02
- Publisher
- SPRINGER
- Abstract
- In this study, four API X80 linepipe steel specimens were fabricated by varying the cooling rate and finish cooling temperature, and their microstructures and crystallographic orientations were analyzed to investigate the effects of the cooling conditions on the tensile and Charpy impact properties. All the specimens consisted of acicular ferrite (AF), granular bainite (GB), and martensite-austenite (MA) constituents. The volume fraction of MA increased with an increasing cooling rate, and the volume fraction and size of MA tended to decrease with an increasing finish cooling temperature. According to the crystallographic orientation analysis data, the effective grain size and unit crack path decreased as fine ACs having a large amount of high-angle grain boundaries were homogeneously formed, thereby leading to the improvement in the Charpy impact properties. The specimen fabricated with the higher cooling rate and lower finish cooling temperature had the highest upper-shelf energy (USE) and the lowest energy transition temperature (ETT), because it contained a large amount of MA homogeneously distributed inside fine AFs, while its tensile properties remained excellent.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/26005
- DOI
- 10.1007/S11661-009-0135-4
- ISSN
- 1073-5623
- Article Type
- Article
- Citation
- METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 41A, no. 2, page. 329 - 340, 2010-02
- Files in This Item:
-
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.