Bipolar drive waveform for long-gap high-Xe plasma display panels
SCIE
SCOPUS
- Title
- Bipolar drive waveform for long-gap high-Xe plasma display panels
- Authors
- Kim, JH; Jeon, MJ; Hur, GH; Lee, KS; Kim, JS; Kang, BK
- Date Issued
- 2010-04
- Publisher
- ELSEVIER SCIENCE BV
- Abstract
- This paper proposes a drive waveform for plasma display panels (PDPs) which have a long discharge gap and use a high Xe-content discharge gas mixture. The proposed waveform uses bipolar sustain pulses, except for the last sustain pulse of each sub-field, to suppress undesired sustain discharges between facing electrodes; these sustain discharges degrade picture quality. The waveform uses a unipolar pulse for the last sustain to reduce the time lag of the address discharge. A reset waveform was designed for the long-gap high-Xe PDP and implemented in the drive waveform. The proposed waveform was tested on a 12% Xe 42-in. XGA (1024 x 768) single-scan AC POP which had a sustain discharge gap of 180 mu m. The measured dark luminance was 0.16 cd/m(2), full-white luminance was 284 cd/m(2), and luminous efficiency was 1.617 lm/W. The sustain voltage margin was higher than 10 V at the operating point. (C) 2009 Elsevier B.V. All rights reserved.
- Keywords
- Plasma display panel; Sub-field method; Long gap structure; High Xe; PDP drive waveform
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/25302
- DOI
- 10.1016/J.DISPLA.2009.12.001
- ISSN
- 0141-9382
- Article Type
- Article
- Citation
- DISPLAYS, vol. 31, no. 2, page. 67 - 72, 2010-04
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.