Cell parameter extraction method for AC plasma display panels
SCIE
SCOPUS
- Title
- Cell parameter extraction method for AC plasma display panels
- Authors
- Soh, SY; Kim, SH; Seo, JW; Jung, YK; Kang, BK
- Date Issued
- 2006-07
- Publisher
- ELSEVIER SCIENCE BV
- Abstract
- This paper presents a cell parameter extraction method for three-electrode AC plasma display panels (PDPs). This method uses three different two-electrode AC discharges to extract the cell capacitances. The drive point capacitances of the cell with and without a two-electrode dark discharge were measured, and the cell capacitances were extracted from them. The extracted cell capacitances agree well with those obtained from a three-dimensional electromagnetic simulation. Electrical equivalent circuits of the plasma were constructed using Jung's model [Y.K. Jung, J.W. Seo, Y.H. Kim, B.K. Kang, Circuit model for two-electrode AC discharge, IEEE Trans. Plasma Sci., 31(3), pp. 362-368, 2003.] and the measured firing voltages. A circuit model for the cell was constructed using the cell capacitances and the equivalent circuits for the plasma. The results of electrical simulation using this circuit model agree well with the measurements, indicating that the presented circuit model would be useful for simulating the electrical behaviors of a three-electrode AC PDP. (C) 2006 Elsevier B.V. All rights reserved.
- Keywords
- AC discharge; circuit model of plasma; plasma display panel (PDP); dark discharge; firing voltage
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/23895
- DOI
- 10.1016/j.displa.2005.12.003
- ISSN
- 0141-9382
- Article Type
- Article
- Citation
- DISPLAYS, vol. 3, no. 3, page. 97 - 107, 2006-07
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.