Experimental study of heating surface angle effects on single bubble growth
SCIE
SCOPUS
KCI
- Title
- Experimental study of heating surface angle effects on single bubble growth
- Authors
- Kim, J; Kim, HD; Lee, J; Kwon, YC; Kim, JH; Kim, MH
- Date Issued
- 2006-11
- Publisher
- KOREAN SOC MECHANICAL ENGINEERS
- Abstract
- Nucleate pool boiling experiments were performed using pure R11 for various surface angles under constant heat flux conditions during saturated pool boiling. A 1-mm-diameter circular heater with an artificial cavity in the center that was fabricated using a MEMS technique and a high-speed controller were used to maintain the constant heat flux. Bubble growth images were taken at 5000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of the surface angle on the bubble growth behavior were analyzed for the initial and thermal growth regions using dimensional scales. The parameters that affected the bubble growth behavior were the bubble radius, bubble growth rate, sliding velocity, bubble shape, and advancing and receding contact angles. These phenomena require further analysis for various surface angles and the obtained constant heat flux data provide a good foundation for such future work.
- Keywords
- surface angle; constant heat flux; single bubble growth; nucleate pool boiling; circular heater; artificial cavity; CONSTANT WALL TEMPERATURE; NUCLEATE; ORIENTATION; RATES
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/23519
- DOI
- 10.1007/BF03027591
- ISSN
- 1738-494X
- Article Type
- Article
- Citation
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 20, no. 11, page. 1980 - 1992, 2006-11
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.