Effect of single crystalline MgO powder treatment of phosphor surface on discharge property of high-Xe AC plasma display panels
SCIE
SCOPUS
- Title
- Effect of single crystalline MgO powder treatment of phosphor surface on discharge property of high-Xe AC plasma display panels
- Authors
- Chung, MS; Jeon, MJ; Lee, SC; Kang, BK; Kim, HJ; Yang, SS; Kim, JS; Ahn, YJ
- Date Issued
- 2007-04
- Publisher
- ELSEVIER SCIENCE BV
- Abstract
- This paper presents a method of surface treatment of phosphor using a single crystalline MgO powder, and investigates effect of the surface treatment on discharge property of a plasma display panel (PDP). The discharge gas of the PDP was a 88% Ne-12% Xe gas mixture at a pressure of 400 Torr. For the surface treatment, a single crystalline MgO powder was mixed in methanol, sprayed on the phosphor surface, and annealed at 400 degrees C. This treatment suppressed glow discharge, which was observed very often in the weak discharges for reset of PDP if the phosphor works as a cathode, and provided a favorable condition for the PDP reset operation. When an experimental PDP fabricated using the surface treatment was driven by the twin reset waveform, the measured time delay for 99.9% cumulative probability of address discharge was 830 ns, which meets the timing requirement for addressing a Full HD (1920 x 1080 resolution) PDP with the 10 sub-field single scan method. (C) 2007 Elsevier B.V. All rights reserved.
- Keywords
- plasma display panel; phosphor surface treatment; Townsend discharge; facing dark discharge; address jitter; IMPROVEMENT; RESET; PDP
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/23287
- DOI
- 10.1016/j.displa.2007.04.007
- ISSN
- 0141-9382
- Article Type
- Article
- Citation
- DISPLAYS, vol. 28, no. 2, page. 68 - 73, 2007-04
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.