Finite element analysis of hot forging with flow softening by dynamic recrystallization
SCIE
SCOPUS
- Title
- Finite element analysis of hot forging with flow softening by dynamic recrystallization
- Authors
- Bang, W; Lee, CS; Chang, Y
- Date Issued
- 2003-03-10
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- The change of flow stress due to dynamic recrystallization (DRX) during hot forming process is investigated. A series of mechanical tests had been conducted at various temperatures, and constitutive relations and recrystallization kinetics were formulated from the test results. The effect of DRX on the flow stress was implemented in a commercial FEM code by conditioned remeshing followed by remapping of the state variables. The datum strain of stress compensation was optimized to minimize the overestimation of forming loads. Suggested datum strain were formulated as an exclusive function of critical strain for recrystallization and validated by mechanical tests. (C) 2002 Elsevier Science B.V. All rights reserved.
- Keywords
- hot forging; flow softening; dynamic recrystallization; FEM; critical strain; FE
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/18660
- DOI
- 10.1016/S0924-0136(02)00443-0
- ISSN
- 0924-0136
- Article Type
- Article
- Citation
- JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol. 134, no. 2, page. 153 - 158, 2003-03-10
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.