Effect of constituent phase on mechanical properties of 9Cr-1WVTa reduced activation ferritic-martensitic steels
SCIE
SCOPUS
- Title
- Effect of constituent phase on mechanical properties of 9Cr-1WVTa reduced activation ferritic-martensitic steels
- Authors
- Lee, CH; Moon, J; Park, MG; Lee, TH; Jang, MH; Kim, HC; Suh, DW
- Date Issued
- 2014-12
- Publisher
- Elesevier
- Abstract
- Influence of the formation of ferrite and accompanying carbides in martensite matrix on the tensile and Charpy impact properties was investigated for reduced activation ferritic martensitic (RAFM) 9Cr-1WVTa steel. As the fractions of ferrite and carbide adjacent to the ferrite grain boundary increase, both tensile and Charpy impact properties deteriorated in as-normalized condition. In particular, the tensile strength and elongation decreased simultaneously, which is believed to be led by the localized deformation in ferrite which is softer than martensite, promoting the formation and growth of voids. In addition, the formation of ferrite was also detrimental to the Charpy impact properties regarding to the absorbed energy because the precipitation of carbides around ferrite were vulnerable to the nucleation and propagation of cleavage cracks. The degradation of tensile properties can be recovered by tempering, but the DBTT temperature still increases with presence of ferrite. (C) 2014 Elsevier B.V. All rights reserved.
- Keywords
- LOW-ALLOY STEEL; FUSION-REACTORS
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/14427
- DOI
- 10.1016/J.JNUCMAT.2014.07.047
- ISSN
- 0022-3115
- Article Type
- Article
- Citation
- JOURNAL OF NUCLEAR MATERIALS, vol. 455, no. 1-3, page. 421 - 425, 2014-12
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.