Open Access System for Information Sharing

Browse by Researchers

PARK, SEONG JIN(박성진) scopus

Department: Dept of Mechanical Engineering(기계공학과)

Major(s): -

E-Mail

Homepage

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Results 1-14 of 14 (Search time: 0.003 seconds).

Article

Fabrication of Equiatomic CoCrFeMnNi High-Entropy Alloy by Metal Injection Molding Process Using Coarse-Sized PowdersKCI

한국분말재료학회지, vol. 30, no. 1, page. 1 - 6, 2023-02

Article

Optimization of Process Condition for Fe Nano Powder Injection MoldingKCI

한국분말야금학회지, vol. 24, no. 3, page. 223 - 228, 2017-06

Article

Representative Volume Element Analysis of Fluid-Structure Interaction Effect on Graphite Powder Based Active Materials for Lithium-Ion BatteriesKCI

Journal of Korean Powder Metallurgy Institute, 2017-01

Article

폐열에너지 하베스팅을 위한 열전모듈 발전특성 연구KCI

에너지공학, vol. 25, no. 4, page. 184 - 189, 2016-12

Article

Development of powder injection molding process for a piezoelectric PAN-PZT ceramicsKCI

Journal of Korean Powder Metallurgy Institute, vol. 23, no. 2, page. 112 - 119, 2016-03

Article

Development of Powder Injection Molding Process for Fabrication of Glass ComponentKCI

Journal of Korean Powder Metallurgy Institute, vol. 23, no. 1, page. 26 - 32, 2016-01

Article

Simulation and Experiment of Injection Molding Process for Superalloy FeedstockKCI

Journal of Korean Powder Metallurgy Institute, 2015-02

Article

Atomistic Simulation of Sintering Mechanism for Copper Nano-PowdersKCI

Journal of Korean Powder Metallurgy Institute, vol. 22, no. 4, page. 247 - 253, 2015-01

Article

Spark Plasma Sintering Behaviors of M-type Barium Hexaferrite Nano PowdersKCI

Journal of Korean Powder Metallurgy Institute, 2014-12

Article

Densification Behavior of Rhenium Alloy using Master Sintering CurveKCI

Journal of Korean Powder Metallurgy Institute, vol. 21, no. 1, page. 7 - 15, 2014-02

Article

Preparation of Metal Injection Molded Dental Components using Spheroidized Ti Powders by Plasma ProcessKCI

Journal of Korean Powder Metallurgy Institute, 2013-12

Article

NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISC (PART I) – INJECTION MOLDING WITH VISCOELASTIC COMPRESSIBLE FLUID MODEL

TRANSACTIONS OF KSME (A), vol. 22, no. 2, page. 289 - 301, 1998-02

Article

NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISC (PART II) – EFFECT OF COMPRESSION STAGE

TRANSACTIONS OF KSME (A), vol. 22, no. 2, page. 302 - 310, 1998-02

Article

OPTIMUM DESIGN OF INJECTION MOLDING COOLING SYSTEM DESIGN VIA BOUNDARY ELEMENT METHOD

TRANSACTIONS OF KSME (A), vol. 21, no. 11, page. 1173 - 1185, 1997-11

Open Access System for Information Sharing

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Date issued

Type

Subject

Journal Registered

Browse