Open Access System for Information Sharing

Browse by Researchers

KIM, HYOUNG SEOP(김형섭) orcid researcherid google scholar scopus

Department: Ferrous & Eco Materials Technology(친환경소재대학원)

Major(s): -

E-Mail

Homepage

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Results 1-20 of 31 (Search time: 0.002 seconds).

Applied search limites :

Date Issued : [2010 TO 2019] Subject : BEHAVIOR Subject : SEVERE PLASTIC-DEFORMATION

Article

Effect of the fabrication method on the wear properties of copper silicon carbide compositesSCIESCOPUS

TRIBOLOGY INTERNATIONAL, vol. 128, page. 140 - 154, 2018-12

Article

Investigation of direct extrusion channel effects on twist extrusion using experimental and finite element analysisSCIESCOPUS

MEASUREMENT, vol. 127, page. 115 - 123, 2018-10

Article

Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealingSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 734, page. 445 - 452, 2018-09

Article

Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloySCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 734, page. 338 - 340, 2018-09

Article

Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 KSCIESCOPUS

Scientific Reports, vol. 8, no. 1, 2018-07

Article

Fabrication of Fullerene-Reinforced Aluminum Matrix NanocompositesSCIESCOPUS

Acta Metallurgica Sinica-English Letters, vol. 30, no. 10, page. 973 - 982, 2017-10

Article

Inhomogeneous Deformation of Interstitial Free Steel during the High Pressure Torsion ProcessSCIESCOPUSKCI

Journal of the Korean Institute of Metals and Materials, vol. 55, no. 10, page. 710 - 715, 2017-08

Article

Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copperSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 684, page. 567 - 576, 2017-01

Article

Ring-Constraint High-Pressure Torsion ProcessSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 47A, no. 7, page. 3473 - 3478, 2016-07

Article

Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM SimulationsSCIESCOPUS

Materials Transactions, vol. 57, no. 4, page. 533 - 538, 2016-04

Article

Strain Softening Induced by High Pressure Torsion in Copper AlloysSCIESCOPUS

Materials Transactions, vol. 56, no. 10, page. 48 - 53, 2015-10

Article

Off-Axis Twist Extrusion for Uniform Processing of Round BarsSCIESCOPUSKCI

METALS AND MATERIALS INTERNATIONAL, vol. 21, no. 4, page. 734 - 740, 2015-07

Article

Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloySCIESCOPUS

JOURNAL OF MATERIALS SCIENCE, vol. 50, no. 11, page. 4003 - 4011, 2015-06

Article

Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental ApplicationsSCIESCOPUS

ACS APPLIED MATERIALS & INTERFACES, vol. 7, no. 18, page. 9598 - 9607, 2015-05-13

Article

Al/C60 Nanocomposites Fabricated by High-Pressure TorsionSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 46A, no. 5, page. 1838 - 1842, 2015-05

Article

Work-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure TorsionSCIESCOPUS

Scientific Reports, vol. 5, 2015-04-23

Article

Consolidation of Cu-based amorphous alloy powders by high-pressure torsionSCIESCOPUS

JOURNAL OF MATERIALS SCIENCE, vol. 50, no. 8, page. 3164 - 3174, 2015-04

Article

Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing ProcessSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 46A, no. 4, page. 1805 - 1813, 2015-04

Article

Wear properties of brass samples subjected to constrained groove pressing processSCIESCOPUS

MATERIALS & DESIGN, vol. 63, page. 531 - 537, 2014-11

Article

Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure TorsionSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 45A, no. 9, page. 4129 - 4137, 2014-08

1 2

Open Access System for Information Sharing

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Date issued

Type

Subject

Journal Registered

Browse