Open Access System for Information Sharing

Browse by Researchers

KIM, HYOUNG SEOP(김형섭) orcid researcherid google scholar scopus

Department: Ferrous & Eco Materials Technology(친환경소재대학원)

Major(s): -

E-Mail

Homepage

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Results 1-18 of 18 (Search time: 0.003 seconds).

Applied search limites :

Author : 451 Subject : MICROSTRUCTURE Subject : TENSILE PROPERTIES

Article

Leveraging a coarse yet strong matrix in L12-strengthened high-entropy alloy through simplified thermomechanical processingSCIESCOPUS

Materials Science and Engineering: A, vol. 895, page. 146247, 2024-03

Article

Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloysSCIESCOPUS

INTERNATIONAL JOURNAL OF PLASTICITY, vol. 159, 2022-12

Article

Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloySCIESCOPUS

Acta Materialia, vol. 225, 2022-02

Article

Superior strain-hardening by deformation-induced nano-HCP martensite in Fe-Mn-Si-C high-manganese steelSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 824, 2021-09

Article

Strength-ductility enhancement in multi-layered sheet with high-entropy alloy and high-Mn twinning-induced plasticity steelSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 822, 2021-08

Article

Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloySCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 773, 2020-01-31

Article

Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloySCIESCOPUS

JOURNAL OF ALLOYS AND COMPOUNDS, vol. 809, 2019-11

Article

Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloysSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 724, page. 403 - 410, 2018-05

Article

Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperaturesSCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 712, page. 108 - 113, 2018-01

Article

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloySCIESCOPUS

Nature Communications, vol. 8, 2017-06

Article

On the strain rate dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at room and liquid nitrogen temperaturesSCIESCOPUS

Materials Research Letters, vol. 5, no. 7, page. 472 - 477, 2017-03

Article

Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloySCIESCOPUS

Materials Science and Engineering: A, vol. 682, page. 569 - 576, 2017-01

Article

Effects of Annealing Treatment Prior to Cold Rolling on Delayed Fracture Properties in Ferrite-Austenite Duplex Lightweight SteelsSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 47A, no. 2, page. 706 - 717, 2016-02

Article

Contributions of different strengthening mechanisms to the shear strength of an extruded Mg-4Zn-0.5Ca alloySCIESCOPUS

PHILOSOPHICAL MAGAZINE, vol. 95, no. 31, page. 3452 - 3466, 2015-11-02

Article

Quasi-static and Dynamic Compressive Properties of Ti-Based Amorphous Alloys Modified from Conventional Ti-6Al-4V Titanium AlloySCIESCOPUS

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 607, page. 197 - 205, 2014-06-23

Article

Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) SteelsSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 44, no. 2, page. 776 - 786, 2013-02

Article

Analysis and Estimation of Yield Strength of API X80 Linepipe Steel Pipe by Low-Cycle Fatigue TestsSCIESCOPUSKCI

METALS AND MATERIALS INTERNATIONAL, vol. 18, no. 4, page. 597 - 606, 2012-08

Article

Hot deformation of ultrafine-grained Al6063/Al2O3 nanocompositesSCIESCOPUS

JOURNAL OF MATERIALS SCIENCE, vol. 46, no. 14, page. 4994 - 5001, 2011-07

Open Access System for Information Sharing

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Date issued

Type

Subject

Journal Registered

Browse