Open Access System for Information Sharing

Browse by Researchers

KIM, HYOUNG SEOP(김형섭) orcid researcherid google scholar scopus

Department: Ferrous & Eco Materials Technology(친환경소재대학원)

Major(s): -

E-Mail

Homepage

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Results 41-60 of 113 (Search time: 0.002 seconds).

Applied search limites :

Author : 451 Date Issued : [2010 TO 2019] Subject : MICROSTRUCTURE

Article

Numerical analysis on the formation of P-orientation near coarse precipitates in FCC crystals during recrystallizationSCIESCOPUS

ACTA MATERIALIA, vol. 131, no. 1, page. 363 - 372, 2017-06

Article

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloySCIESCOPUS

Nature Communications, vol. 8, 2017-06

Article

Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energySCIESCOPUS

npj Computational Materials, vol. 3, 2017-05

Article

Fabrication of Al/Al2Cu in situ nanocomposite via friction stir processingSCIESCOPUS

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, vol. 27, no. 4, page. 779 - 788, 2017-04

Article

On the strain rate dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at room and liquid nitrogen temperaturesSCIESCOPUS

Materials Research Letters, vol. 5, no. 7, page. 472 - 477, 2017-03

Article

Tensile properties of cold-rolled TWIP-cored three-layer steel sheetsSCIESCOPUS

Materials Science and Engineering:A, vol. 686, page. 160 - 167, 2017-02

Article

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structureSCIESCOPUS

Materials Research Letters, vol. 5, no. 5, page. 350 - 356, 2017-02

Article

Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloySCIESCOPUS

Materials Science and Engineering: A, vol. 682, page. 569 - 576, 2017-01

Article

Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steelSCIESCOPUS

Scientific Reports, vol. 7, page. 40231, 2017-01

Article

Effect of coarse precipitates on surface roughening of an FCC polycrystalline material using crystal plasticitySCIESCOPUS

COMPUTATIONAL MATERIALS SCIENCE, vol. 126, page. 121 - 131, 2017-01

Article

Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic modelSCIESCOPUS

Scientific Reports, vol. 6, 2016-12-12

Article

Effects of Friction and Anvil Design on Plastic Deformation during the Compression Stage of High-Pressure TorsionSCIESCOPUSKCI

Korean Journal of Metal and Materials, vol. 54, no. 11, page. 831 - 837, 2016-11

Article

Compressive deformation behavior of CrMnFeCoNi high-entropy alloySCIESCOPUSKCI

METALS AND MATERIALS INTERNATIONAL, vol. 22, no. 6, page. 982 - 986, 2016-11

Article

Dynamic tensile deformation behavior of Zr-based amorphous alloy matrix composites reinforced with tungsten or tantalum fibersSCIESCOPUSKCI

Metals and Materials International, vol. 22, no. 4, page. 707 - 713, 2016-07

Article

Novel strip-cast Mg/Al clad sheets with excellent tensile and interfacial bonding propertiesSCIESCOPUS

Scientific Reports, vol. 6, page. 26333, 2016-06-01

Article

Effects of Effective Dendrite Size on Dynamic Tensile Properties of Ti-Based Amorphous Matrix CompositesSCIESCOPUS

Metallurgical and materials Transactions A, vol. 47A, no. 4, page. 1504 - 1509, 2016-04

Article

Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM SimulationsSCIESCOPUS

Materials Transactions, vol. 57, no. 4, page. 533 - 538, 2016-04

Article

Modeling and Characterization of Texture Evolution in Twist ExtrusionSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 47A, no. 3, page. 1248 - 1260, 2016-03

Article

Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformationSCIESCOPUS

ACTA MATERIALIA, vol. 105, no. 15, page. 258 - 272, 2016-02-15

Article

Effects of Annealing Treatment Prior to Cold Rolling on Delayed Fracture Properties in Ferrite-Austenite Duplex Lightweight SteelsSCIESCOPUS

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 47A, no. 2, page. 706 - 717, 2016-02

1 2 3 4 5 6

Open Access System for Information Sharing

Co-researchers

Keyword

Publication & Time Cited Count (For the Last 5 years)

Date issued

Type

Subject

Journal Registered

Browse