DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ko, YG | - |
dc.contributor.author | Hwang, DY | - |
dc.contributor.author | Shin, DH | - |
dc.contributor.author | Lee, S | - |
dc.contributor.author | Lee, CS | - |
dc.date.accessioned | 2016-04-01T01:08:44Z | - |
dc.date.available | 2016-04-01T01:08:44Z | - |
dc.date.created | 2009-08-24 | - |
dc.date.issued | 2008-10-15 | - |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.other | 2008-OAK-0000008203 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/22468 | - |
dc.description.abstract | A study was made to investigate the factors influencing the formability on equal-channel angular (ECA) pressing of Ti-6Al-4V alloy, as a typical hard-to-work material, with a variation of ram speed. ECA pressings of Ti-6Al-4V alloy with initial lamellar microstructure were carried out by utilizing a set of die for isothermal condition. In this study, the equation for the effective strain rate during ECA pressing was evaluated by considering the geometry of both die and sample. Quantitative measurement showed that strain rate less than 0.27 s(-1) was found to be the optimum condition for sound deformation while specimens showed the noticeable shear cracking with stain rate above 0.67 s(-1). In spite of optimum condition determined here, however, shallow shear segments were still found in a specimen. This was mainly attributed to the flow localization associated with the flow softening behavior of lamellar microstructure. Such behavior was dependent on the lamellar structure per se, which was in discussion on the relation and the ability to transmit slip across either colony boundaries or alpha/beta lamellae interfaces as a slip filter. (C) 2007 Elsevier B.V. All rights reserved. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.relation.isPartOf | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.subject | Ti-6Al-4V alloy | - |
dc.subject | equal-channel angular pressing | - |
dc.subject | strain rate | - |
dc.subject | lamellar microstructure | - |
dc.subject | colony boundary | - |
dc.subject | alpha/beta interface | - |
dc.subject | HOT-WORKING | - |
dc.subject | MECHANICAL-PROPERTIES | - |
dc.subject | PLASTIC-DEFORMATION | - |
dc.subject | STRAIN-RATE | - |
dc.subject | EXTRUSION | - |
dc.subject | BEHAVIOR | - |
dc.subject | FLOW | - |
dc.subject | SHEAR | - |
dc.subject | TEMPERATURE | - |
dc.title | Factors influencing the equal-channel angular pressing of Ti-6Al-4V alloy having lamellar microstructure | - |
dc.type | Article | - |
dc.contributor.college | 신소재공학과 | - |
dc.identifier.doi | 10.1016/j.msea.2007.06.091 | - |
dc.author.google | Ko, YG | - |
dc.author.google | Hwang, DY | - |
dc.author.google | Shin, DH | - |
dc.author.google | Lee, S | - |
dc.author.google | Lee, CS | - |
dc.relation.volume | 493 | - |
dc.relation.issue | 1-2 | - |
dc.relation.startpage | 164 | - |
dc.relation.lastpage | 169 | - |
dc.contributor.id | 10071833 | - |
dc.relation.journal | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.493, no.1-2, pp.164 - 169 | - |
dc.identifier.wosid | 000259844800026 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 169 | - |
dc.citation.number | 1-2 | - |
dc.citation.startPage | 164 | - |
dc.citation.title | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.volume | 493 | - |
dc.contributor.affiliatedAuthor | Lee, S | - |
dc.contributor.affiliatedAuthor | Lee, CS | - |
dc.identifier.scopusid | 2-s2.0-49949100737 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 4 | - |
dc.type.docType | Article; Proceedings Paper | - |
dc.subject.keywordPlus | HOT-WORKING | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | PLASTIC-DEFORMATION | - |
dc.subject.keywordPlus | STRAIN-RATE | - |
dc.subject.keywordPlus | EXTRUSION | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | FLOW | - |
dc.subject.keywordPlus | SHEAR | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordAuthor | Ti-6Al-4V alloy | - |
dc.subject.keywordAuthor | equal-channel angular pressing | - |
dc.subject.keywordAuthor | strain rate | - |
dc.subject.keywordAuthor | lamellar microstructure | - |
dc.subject.keywordAuthor | colony boundary | - |
dc.subject.keywordAuthor | alpha/beta interface | - |
dc.relation.journalWebOfScienceCategory | Nanoscience & Nanotechnology | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.