DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yongjin Kim | - |
dc.contributor.author | Kim Hyunmin | - |
dc.contributor.author | Shin Sang Yong | - |
dc.contributor.author | Rhee Kiho | - |
dc.contributor.author | Sang Bog Ahn | - |
dc.contributor.author | Lee Duk Lak | - |
dc.contributor.author | Kim, NJ | - |
dc.contributor.author | Lee, S | - |
dc.date.accessioned | 2016-03-31T08:46:02Z | - |
dc.date.available | 2016-03-31T08:46:02Z | - |
dc.date.created | 2013-02-28 | - |
dc.date.issued | 2012-03 | - |
dc.identifier.issn | 1073-5623 | - |
dc.identifier.other | 2012-OAK-0000026626 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/16003 | - |
dc.description.abstract | In this study, cracks formed in the edge side of Bi-S-based free-machining steel billets during hot rolling were analyzed in detail, and their formation mechanisms were clarified in relation with microstructure. Particular emphasis was placed on roles of bands of pearlites or C- and Mn-rich regions and complex iron oxides present in the edge side. Pearlite bands in the cracked region were considerably bent to the surface, while those in the noncracked region were parallel to the surface. This was because the alignment direction of pearlite bands was irregularly deviated up to 45 deg from the normal direction parallel to the surface, while the billet was rolled and rotated at 90 deg in the same direction between rolling passes. On the edge side, where pearlite bands were bent, iron oxides intruded deeply into the interior along pearlite bands, which worked as stress concentration sites during hot rolling and, consequently, main causes of the crack initiation in the rolled billet. On the surface of the wire rod rolled from the cracked billet, a few scabs were found when some protrusions were folded during hot rolling. In order to prevent the cracking in billets and scab formation in wire rods, (1) the increase of rolling passes and the decrease of reduction ratio for homogeneous rolling of billets and (2) the reduction in sulfur content for minimizing the formation and intrusion of complex iron oxides were suggested. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | SPRINGER | - |
dc.relation.isPartOf | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.title | Formation Mechanisms of Cracks Formed during Hot Rolling of Free-machining Steel Billets | - |
dc.type | Article | - |
dc.contributor.college | 철강대학원 | - |
dc.identifier.doi | 10.1007/s11661-011-0934-2 | - |
dc.author.google | Kim, Y | - |
dc.author.google | Kim, H | - |
dc.author.google | Shin, SY | - |
dc.author.google | Rhee, K | - |
dc.author.google | Ahn, SB | - |
dc.author.google | Lee, DL | - |
dc.author.google | Kim, NJ | - |
dc.author.google | Lee, S | - |
dc.relation.volume | 43A | - |
dc.relation.issue | 3 | - |
dc.relation.startpage | 882 | - |
dc.relation.lastpage | 892 | - |
dc.contributor.id | 10184505 | - |
dc.relation.journal | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.43A, no.3, pp.882 - 892 | - |
dc.identifier.wosid | 000300193300010 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 892 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 882 | - |
dc.citation.title | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.citation.volume | 43A | - |
dc.contributor.affiliatedAuthor | Kim, NJ | - |
dc.contributor.affiliatedAuthor | Lee, S | - |
dc.identifier.scopusid | 2-s2.0-84858864994 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 3 | - |
dc.type.docType | Article | - |
dc.subject.keywordPlus | FREE-CUTTING STEEL | - |
dc.subject.keywordPlus | FERRITE/PEARLITE BAND FORMATION | - |
dc.subject.keywordPlus | METAL-INDUCED EMBRITTLEMENT | - |
dc.subject.keywordPlus | LOW-CARBON STEEL | - |
dc.subject.keywordPlus | DYNAMIC RECRYSTALLIZATION | - |
dc.subject.keywordPlus | DEFORMATION | - |
dc.subject.keywordPlus | INCLUSIONS | - |
dc.subject.keywordPlus | PREVENTION | - |
dc.subject.keywordPlus | MACHINABILITY | - |
dc.subject.keywordPlus | ADDITIVES | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.