Effects of short-range ordering and stacking fault energy on tensile behavior of nitrogen-containing austenitic stainless steels

Abstract

© 2022 Elsevier B.V.The tensile behavior of austenitic stainless steels with different concentration of nitrogen was studied by analyzing deformation microstructure and calculating short-range ordering (SRO) as well as stacking fault energy (SFE). Increasing nitrogen concentration increased SFE and SRO, which affected the tensile behavior. From the early to intermediate deformation stages, the nitrogen addition induced slip planarity and the delay of dynamic recovery, which were brought by the increase of SRO. As a result, work hardening rate (WHR) rose with the nitrogen content at the end of the intermediate deformation stage. On the other hand, the SFE effect was noticeable at higher strain levels. With increasing nitrogen concentration, the formation of slip lines was suppressed and dynamic recovery was promoted. Hence, the reduction in WHR was accelerated with the nitrogen addition. When the overall dynamic recovery behavior was assessed with dislocation-density based constitutive modeling, it was found to depend mainly on SRO rather than on SFE. Therefore, the alloy with higher nitrogen content could achieve higher dislocation density and flow stress.