Open Access System for Information Sharing

Login Library

 

ARTICLE
Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads
Full metadata record
Files in This Item:
There are no files associated with this item.
DC FieldValueLanguage
dc.contributor.authorAkbarpour, MR-
dc.contributor.authorSalahi, E-
dc.contributor.authorHesari, FA-
dc.contributor.authorSimchi, A-
dc.contributor.authorKim, HS-
dc.contributor.author김형섭-
dc.date.accessioned2016-03-31T08:05:41Z-
dc.date.available2016-03-31T08:05:41Z-
dc.date.issued2014-01-
dc.identifier.citationCeramics International-
dc.identifier.citationv.40-
dc.identifier.citationpp.951-960-
dc.identifier.issn0272-8842-
dc.identifier.other2014-OAK-0000029793-
dc.identifier.urihttps://oasis.postech.ac.kr/handle/2014.oak/14548-
dc.description.abstractCu/SiC nanocomposite powders with homogeneously distributed nanosize SiC particles were produced by high energy mechanical milling (MM). Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and micro-hardness and density measurements were performed to understand the effects of microstructure and hardness on compaction behavior during MM. The effects of SiC nanoparticle content and mechanical milling time on apparent density (AD) and tap density (TD) of the nanocomposite powders were systematically investigated. The Hausner ratio (HR), defined as TD to AD, were estimated to evaluate friction between the particles. Increasing MM duration and SiC content resulted in a decrease in HR due to the changes in morphology and hardness of the powders. Additionally, the compressibility behavior of the powders was theoretically examined using a compaction equation to investigate the deformation capacity. Densification parameters of the nanocomposite powders showed a significant decrease with increasing MM duration and a slight decrease with increasing SiC content. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.-
dc.description.statementofresponsibilityX-
dc.publisherElsevier-
dc.subjectNanocomposite powder-
dc.subjectCopper-
dc.subjectSiC nanoparticles-
dc.subjectCompressibility-
dc.subjectMicrostructure-
dc.subjectCOMPOSITE POWDERS-
dc.subjectMATRIX COMPOSITES-
dc.subjectPARTICLES-
dc.titleMicrostructure and compressibility of SiC nanoparticle reinforced Cu nanocomposite powders processed by high energy mechanical milling-
dc.typeARTICLE-
dc.contributor.college신소재공학과-
dc.identifier.doi10.1016/J.CERAMINT.2013.06.091-
dc.author.googleAkbarpour, MR-
dc.author.googleSalahi, E-
dc.author.googleHesari, FA-
dc.author.googleSimchi, A-
dc.author.googleKim, HS-
dc.relation.volume40-
dc.relation.startpage951-
dc.relation.lastpage960-
dc.contributor.id10056225-
dc.publisher.locationUK-
dc.relation.journalCeramics International-
dc.relation.indexSCI급, SCOPUS 등재논문-
dc.relation.sciSCI-
dc.collections.nameJournal Papers-

qr_code

  • mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Views & Downloads

Browse