DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi Hojung | - |
dc.contributor.author | Kim Joohoon | - |
dc.contributor.author | Kim Wonjoong | - |
dc.contributor.author | Seong Junhwa | - |
dc.contributor.author | Park Chanwoong | - |
dc.contributor.author | Choi Minseok | - |
dc.contributor.author | Kim Nakhyun | - |
dc.contributor.author | Ha Jisung | - |
dc.contributor.author | Qiu Cheng-Wei | - |
dc.contributor.author | Rho Junsuk | - |
dc.contributor.author | Lee Heon | - |
dc.date.accessioned | 2024-02-29T04:21:38Z | - |
dc.date.available | 2024-02-29T04:21:38Z | - |
dc.date.created | 2024-02-25 | - |
dc.date.issued | 2023-06 | - |
dc.identifier.issn | 2662-1991 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/120527 | - |
dc.description.abstract | Nanoimprint lithography (NIL) has attracted attention recently as a promising fabrication method for dielectric metalenses owing to its low cost and high throughput, however, high aspect ratio (HAR) nanostructures are required to manipulate the full 2 pi phase of light. Conventional NIL using a hard-polydimethylsiloxane (h-PDMS) mold inevitably incurs shear stress on the nanostructures which is inversely proportional to the surface area parallel to the direction of detachment. Therefore, HAR structures are subjected to larger shear stresses, causing structural failure. Herein, we propose a novel wet etching NIL method with no detachment process to fabricate flawless HAR metalenses. The water-soluble replica mold is fabricated with polyvinyl alcohol (PVA) which is simpler than an h-PDMS mold, and the flexibility of the PVA mold is suitable for direct printing as its high tensile modulus allows high-resolution patterning of HAR metalenses. The diffraction-limited focusing of the printed metalenses demonstrates that it operates as an ideal lens in the visible regime. This method can potentially be used for manufacturing various nanophotonic devices that require HAR nanostructures at low cost and high throughput, facilitating commercialization. | - |
dc.language | English | - |
dc.publisher | SpringerOpen | - |
dc.relation.isPartOf | PhotoniX | - |
dc.title | Realization of high aspect ratio metalenses by facile nanoimprint lithography using water-soluble stamps | - |
dc.type | Article | - |
dc.identifier.doi | 10.1186/s43074-023-00096-2 | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | PhotoniX, v.4, no.1, pp.1 - 11 | - |
dc.identifier.wosid | 001008609900001 | - |
dc.citation.endPage | 11 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 1 | - |
dc.citation.title | PhotoniX | - |
dc.citation.volume | 4 | - |
dc.contributor.affiliatedAuthor | Rho Junsuk | - |
dc.identifier.scopusid | 2-s2.0-85161989363 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.type.docType | Article | - |
dc.subject.keywordPlus | METASURFACE | - |
dc.subject.keywordPlus | FABRICATION | - |
dc.subject.keywordPlus | ARRAYS | - |
dc.subject.keywordPlus | RESOLUTION | - |
dc.subject.keywordAuthor | Nanoimprint lithography | - |
dc.subject.keywordAuthor | Wet etching | - |
dc.subject.keywordAuthor | Polyvinyl alcohol | - |
dc.subject.keywordAuthor | High fidelity nanofabrication | - |
dc.subject.keywordAuthor | High aspect ratio nanostructure | - |
dc.subject.keywordAuthor | Metalens | - |
dc.relation.journalWebOfScienceCategory | Optics | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.