Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
SCIE
SCOPUS
- Title
- Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
- Authors
- Lee, S; De Cooman, BC
- Date Issued
- 2014-12
- Publisher
- SPRINGER
- Abstract
- In the present study, the relationship between the microstructure and the mechanical properties of Fe-10 pct Mn-3 pct Al-2 pct Si-0.3 pct C multi-phase steel was investigated. The 10 pct Mn multi-phase steel exhibits a combination of high tensile strength and enhanced ductility resulting from deformation-twinning and strain-induced transformation occurring in succession. A pronounced intercritical annealing temperature dependence of the tensile behavior was observed. The annealing temperature dependence of the retained austenite volume fraction, composition, and the grain size was analyzed experimentally, and the effect of the microstructural parameters on the kinetics of mechanical twinning and strain-induced martensite formation was quantified. A dislocation density-based constitutive model was developed to predict the mechanical properties of 10 pct Mn multi-phase steel. The model also allows for the determination of the critical strain for dynamic strain aging effect.
- Keywords
- INDUCED PLASTICITY STEELS; STACKING-FAULT ENERGY; MECHANICAL-PROPERTIES; GRAIN-SIZE; STRAIN; TRANSFORMATION; DEFORMATION; ALLOY; DISLOCATION; MARTENSITE
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/11632
- DOI
- 10.1007/S11661-014-2540-6
- ISSN
- 1073-5623
- Article Type
- Article
- Citation
- METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 45A, no. 13, page. 6039 - 6052, 2014-12
- Files in This Item:
-
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.