Open Access System for Information Sharing

Login Library

 

Article
Cited 9 time in webofscience Cited 11 time in scopus
Metadata Downloads
Full metadata record
Files in This Item:
There are no files associated with this item.
DC FieldValueLanguage
dc.contributor.authorNam, Hyunbin-
dc.contributor.authorPark, Sangwon-
dc.contributor.authorPark, Nokeun-
dc.contributor.authorNa, Youngsang-
dc.contributor.authorKim, Hyoungseop-
dc.contributor.authorYoo, Sun-Joon-
dc.contributor.authorMoon, Young-Hoon-
dc.contributor.authorKang, Namhyun-
dc.date.available2020-02-25T07:50:03Z-
dc.date.created2020-02-05-
dc.date.issued2020-04-
dc.identifier.issn0925-8388-
dc.identifier.urihttps://oasis.postech.ac.kr/handle/2014.oak/101079-
dc.description.abstractThis study investigates the effect of stainless steel (STS) 308 L and high-entropy alloy (HEA) filler metals on gas tungsten arc (GTA) welding. The weldability of the cast CoCrFeMnNi HEAs was determined based on the microstructural and mechanical properties of the welds. The cast HEA exhibited larger dendrite packets than the weld metals (WMs). The hardness in the WM was superior compared with that in the base metal (BM). The WM using STS 308 L exhibited a fully face-centred cubic (FCC) structure with no indication of 8-ferrite and lower hardness than that using HEA filler. The GTA welds using both fillers showed tensile properties comparable to the cast BM at 298 K, and the tensile fracture of the transverse welds occurred near the cast BM. The cryogenic tensile properties in the GTA welds were superior compared with the room-temperature property due to the significant formation of deformation twins and high dislocation density at 77 K. This was probably due to the decrease in the stacking fault energy at the cryogenic temperature compared with that at the room temperature. Therefore, it is possible to apply commercial STS 308 L filler metal for the CoCrFeMnNi HEA in cryogenic applications. (C) 2019 Elsevier B.V. All rights reserved.-
dc.languageEnglish-
dc.publisherELSEVIER SCIENCE SA-
dc.subjectChromium alloys-
dc.subjectCobalt alloys-
dc.subjectCryogenics-
dc.subjectCrystal structure-
dc.subjectEntropy-
dc.subjectFillers-
dc.subjectHardness-
dc.subjectHigh-entropy alloys-
dc.subjectIron alloys-
dc.subjectManganese alloys-
dc.subjectMechanical properties-
dc.subjectMetallography-
dc.subjectMetallurgy-
dc.subjectMetals-
dc.subjectMicrostructure-
dc.subjectTwinning-
dc.subjectWeldability-
dc.subjectWelds-
dc.subjectCryogenic applications-
dc.subjectCryogenic temperatures-
dc.subjectGas tungsten arc welding-
dc.subjectHigh dislocation density-
dc.subjectLiquid-solid reaction-
dc.subjectMetals and alloys-
dc.subjectRoom temperature properties-
dc.subjectStacking fault energies-
dc.subjectFiller metals-
dc.titleWeldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications-
dc.typeArticle-
dc.type.rimsART-
dc.identifier.bibliographicCitationJOURNAL OF ALLOYS AND COMPOUNDS, v.819-
dc.identifier.wosid000507378300097-
dc.citation.titleJOURNAL OF ALLOYS AND COMPOUNDS-
dc.citation.volume819-
dc.contributor.affiliatedAuthorKim, Hyoungseop-
dc.identifier.scopusid2-s2.0-85076825837-
dc.description.journalClass1-
dc.description.isOpenAccessN-
dc.type.docTypeArticle-
dc.subject.keywordPlusMECHANICAL-PROPERTIES-
dc.subject.keywordPlusHOT CRACKING-
dc.subject.keywordPlusSTEEL-
dc.subject.keywordPlusMICROSTRUCTURE-
dc.subject.keywordPlusBEHAVIOR-
dc.subject.keywordAuthorMetals and alloys-
dc.subject.keywordAuthorLiquid-solid reactions-
dc.subject.keywordAuthorCrystal structure-
dc.subject.keywordAuthorMicrostructure-
dc.subject.keywordAuthorMetallography-
dc.subject.keywordAuthorMechanical properties-

qr_code

  • mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher

김형섭KIM, HYOUNG SEOP
Dept of Materials Science & Enginrg
Read more

Views & Downloads

Browse