Open Access System for Information Sharing

Login Library

 

Article
Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper

Title
Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper
Authors
Dong-Hyun AhnMinju KangLee Ju ParkLee, SKIM, HYOUNG SEOP
POSTECH Authors
Lee, SKIM, HYOUNG SEOP
Date Issued
Jan-2017
Publisher
ELSEVIER SCIENCE SA
Abstract
Step-wise deformations are applied to pure copper along uniaxial direction or multiaxial directions in three conditions of speed and temperature: static and room temperature, dynamic and room temperature, or dynamic and low temperature. Through examinations of total 36 deformation stages, the influences of strain rate, temperature, and deformation direction on microstructural evolution and mechanical properties are investigated. According to the results, the deformation mechanism at extreme conditions (high strain rate and low temperature) changes from only dislocation slip to dislocation slip and deformation twinning. Although deformation-direction change has no significant effect on the final mechanical properties and total dislocation densities measured from X-ray diffraction results, the evolutions of grain-boundary misorientation and geometrically necessary dislocations (GND5) are clearly influenced. The trend of microstructural evolution, i.e. larger grain size and lower GND densities by multi-axial deformation than the uniaxial case, is reversed when twinning occurred. Based on the results, we suggest four evolution models: uniaxial or multi axial cases with dislocation slip, or with dislocation slip and deformation twining. Even if the homogenous and almost fully twinned microstructure producing improved mechanical strength was obtained by applying the extreme deformations, poor ductility of the processed specimen were observed.
URI
http://oasis.postech.ac.kr/handle/2014.oak/37419
DOI
10.1016/J.MSEA.2016.12.091
ISSN
0921-5093
Article Type
Article
Citation
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 684, page. 567 - 576, 2017-01
Files in This Item:
There are no files associated with this item.

qr_code

  • mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher

 LEE, SUNG HAK
Dept of Materials Science & Enginrg
Read more

Views & Downloads

Browse